996
There is no fix for Intel’s crashing 13th and 14th Gen CPUs — any damage is permanent
(www.theverge.com)
This is a most excellent place for technology news and articles.
That's not true. It was just last year that some of the Ryzen 7000 models were burning themselves out from the insides at default settings (within AMD specs) due to excessive SoC voltage. They fixed it through new specs and working with board manufacturers to issue new BIOS, and I think they eventually gave in to pressure to cover the damaged units. I guess we'll see if Intel ends up doing the same.
I generally agree with your sentiment, though. :)
I just wish both brands would chill. Pushing the hardware so hard for such slim gains is wasting power and costing customers.
That was asus applying too much voltage to the x3d skus
Where do you think Asus got the specs for that voltage?
Not from AMD. From the autogenerated transcript (with minor edits where it messed up the names of things):
This was pretty much all on motherboard manufacturers, and ASUS was particularly bad (out scumbaging MSI, good job, guys).
At the start of this Intel mess, it was thought they had a similar issue on their hands and motherboard manufactures just needed to get in line, but it ended up going a lot deeper.
That doesn't contradict anything I wrote. Note that it says AMD's recommended cutoff is now 1.3 volts, implying that it wasn't before this mess began. Note also that the problem was worse on Asus boards because their components' tolerance was a bit too loose for a target voltage this high, not because they used a voltage target beyond AMD's specified cutoff. If the cutoff hadn't been pushed so high for this generation in the first place, that same tolerance probably would have been okay.
In any case, there's no sense in bickering about it. Asus was not without blame (I was upset with them myself) but also not the only affected brand, so it's not possible that they were the cause of the underlying problem, now is it?
AMD and Intel have been pushing their CPUs to very high voltages and temperatures for small performance gains recently. 95°C as the new "normal" was unheard of just a few years ago. It's no surprise that it led to damage in some cases, especially for early adopters. It's a thin line to walk.