It's like background channel scans don't look at 6ghz
this post was submitted on 05 Mar 2024
44 points (94.0% liked)
Linux
48287 readers
657 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
Sounds like a power savings logic error
There are a lot of reasons to not background scan, like latency and packet loss - scanning for networks typically takes a few hundred milliseconds and in that time you cannot communicate with the network you're connected to. If you don't have the network manager open looking for a network, and you're connected to a network, background scanning is usually disabled.
When a network with multiple APs or bands is connected, neighbourhood reports inform the device of the neighbouring SSIDs so background scanning doesn't have to occur and interrupt connectivity.
Check with a newer Linux kernel. Starting with v6.6 my Mediatek-based WiFi started seeing 6GHz channels.
Interesting - I’ll try that as soon as a 6.6 kernel becomes available in Mint. Seems like 6.5.0-21 is the newest they offer right now.
Have this exact issue, but with 5G. Its only able to see 2.4 for about half a minute and then will find and connect to the 5G
If you can set them up with the same SSID that would be better.
Wi-Fi has all sorts of variables at play.
I can see the same SSID on all three bands now in wavemon, but my computer only connects to it on the 5GHz band, channel 40.
I'm not any more knowledgeable about this stuff than you :(, I just got an AX210 for my laptop the other day, but I don't have a 6 GHz capable router.
It feels like it's some kind of power saving feature or something like that. Do you actually get any faster speeds on 6 GHz?
You could try seeing if you have some kind of "roaming" or "mesh" option in your router settings. There's a feature that's supposed to have the router kick devices off of a connection if it thinks there's a better one in the same mesh network. Not sure if it has any applicability to different frequencies on the same access point. Probably a dead end but you could look into it.
If it's a fully featured router there should be tons of random options to change the power usage of the router's wifi radios and all sorts of other stuff like that. At least on my old Asus router there were tons of options like that.
I can try that, thanks.