homelab

6828 readers

16 users here now

founded 4 years ago

MODERATORS

CMonster@lemmy.ml

Advice On Proposed Router Design (lemmy.tf)

submitted 11 months ago by sabreW4K3@lemmy.tf to c/homelab@lemmy.ml

13 comments fedilink hide all child comments

So I'm trying to build a router. Just need something to handle the networking in my house and the plan is to separate things out via virtual local area networks. Anyway, reading a bunch of threads and comments, I think my design will be something akin to this. Is this good or bad? Ultimately I wanna run OPNSense since that's what most people recommend, but wanna about x86.

NanoPi as a hub: https://a.aliexpress.com/_EHU4JCV

AX3000 as an AP: https://a.aliexpress.com/_EzPBBVX

Network Switch: https://a.aliexpress.com/_EITz5Gz

you are viewing a single comment's thread
view the rest of the comments

[–] sonori@beehaw.org 2 points 11 months ago (2 children)

If you have an always on server, you can always run Opnsense as a vm.

[–] Lem453@lemmy.ca 1 points 9 months ago (1 children)

For people starting out, I highly recommend not doing this. You want to be able to mess with your server without bringing down the whole network.

[–] sonori@beehaw.org 1 points 9 months ago

If you have a hypervisor in a home lab, which it turns out OP does not, odds are good your already running a DNS filter/ server, DHCP server, AD domain, etc so the whole network is down anyway during hypervisor restarts if you don’t have HA setup.

[–] sabreW4K3@lemmy.tf 1 points 11 months ago

Just my RPi, hence the looking for another SBC to do the routing.