homelab

6635 readers

24 users here now

founded 4 years ago

MODERATORS

CMonster@lemmy.ml

Pi Alert VLAN issue (lemmy.world)

submitted 7 months ago by root@lemmy.world to c/homelab@lemmy.ml

5 comments fedilink hide all child comments

I recently discovered Pi Alert (and the various forks of it) and it seems like something that might be useful on my homelab.

I've decided to use this version, and have tried the others as well, but I can't seem to get it to discover things outside of the VLAN that it is installed on.

It is running on a Proxmox VM using a trunk'd interface that has several VLANs available to it. If I SSH into the VM hosting Pi Alert, I am able to ping the devices on the other VLANs without issues, so I know ICMP detection should be working.

Here is the config section. I am using SCAN_SUBNETS = [ '192.168.1.0/24 --interface=ens18', '192.168.2.0/24 --interface=ens18' ] To test 2 of my VLANs, and as mentioned, they are on the same interface, however this does not seem to be working.

Anyone have any suggestions?

you are viewing a single comment's thread
view the rest of the comments

[–] tinsuke@lemmy.world 1 points 7 months ago

Was going to suggest opening an issue on the project page, but there's this, was that you?

https://github.com/leiweibau/Pi.Alert/issues/299