Linux

48461 readers

423 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

nooter692@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

Using RDP from Linux to Windows via Android and VPN (lemmy.world)

submitted 2 months ago by shadowintheday2@lemmy.world to c/linux@lemmy.ml

6 comments fedilink hide all child comments

Ok I know this sounds crazy but it's all about Linux and iptables all the way

I'm using a rooted android phone as a VPN router to keep confidential traffic separated between networks

A and B are in the same network, B provides a separate network for C

Device A: Linux ip 192.168.15.32 wlan0 Device B: rooted Android phone with Termux and VPN Hotspot wlan0 ip 192.168.15.21 wlan1 ip 192.168.38.173

Device C: Windows 10 with RDP wlan1 ip 192.168.15.176

I've tried the following

A: sudo ip route add 192.168.38.0/24 via 192.168.15.21 dev enp1s0

B: Termux, su: sysctl -w net.ipv4.ip_forward=1


iptables -t nat -A POSTROUTING -s 192.168.38.0/24 -o wlan0 -j MASQUERADE

iptables -A FORWARD -i wlan0 -o wlan1 -s 192.168.15.0/24 -d 192.168.38.0/24 -j ACCEPT
iptables -A FORWARD -i wlan1 -o wlan0 -s 192.168.38.0/24 -d 192.168.15.0/24 -j ACCEPT

C: default route via 192.168.38.173 metric 1

C is solely seeing the internet from B's VPN, and can even access wlan0's router, meaning it has access to its internal network. C can ping B, B can ping C

B can ping A and C

A can ping B, but not C, which also means no RDP access

What am I missing ?

you are viewing a single comment's thread
view the rest of the comments

[–] masterofn001@lemmy.ca 4 points 2 months ago* (last edited 2 months ago) (1 children)

Can you post ip r output.

Is your android being used as the modem/tether for device A? (If so adding route 192.168.38.0/24 via _gateway and _gateway dev x0 proto static scope link should allow it to reach C)

If using network manager just use the GUI to add the one line in routes. 192.168.38.0 24 yourgateway - it will do the metric on its own.

What are the gateway addresses?

You'd need to add a route from c to a as well, I believe, but I haven't used windows in forever.

(The above is what I've had to do to get a machine behind an android to ping my other devices.)

[–] shadowintheday2@lemmy.world 2 points 2 months ago* (last edited 2 months ago)

ip r

default via 192.168.15.1 dev enp3s0 proto dhcp src 192.168.15.32 metric 100
192.168.15.0/24 dev enp3s0 proto kernel scope link src 192.168.15.32 metric 100
192.168.38.0/24 via 192.168.15.21 dev enp3s0