this post was submitted on 01 Oct 2024
15 points (100.0% liked)

Linux

48287 readers
647 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
AgreeableLandscape@lemmy.ml
nooter692@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz
15
How do I do BTRFS with RAID and Encryption? (swg-empire.de)
submitted 1 month ago by bjoern_tantau@swg-empire.de to c/linux@lemmy.ml
8 comments fedilink hide all child comments
 

Hi all!

I have a Debian stable server with two hdds in a md RAID which contains an encrypted ext-4 filesystem.

sda          8:0    0   2.7T  0 disk
├─sda1       8:1    0     1G  0 part                    
│ └─md0      9:0    0  1023M  0 raid1 /boot             
├─sda2       8:2    0   2.7T  0 part                    
│ └─md2      9:2    0   2.7T  0 raid1                   
│   └─mdcrypt                                           
│          253:0    0   2.7T  0 crypt /                 
└─sda3       8:3    0     1M  0 part
sdb          8:16   0   2.7T  0 disk                    
├─sdb1       8:17   0     1G  0 part
│ └─md0      9:0    0  1023M  0 raid1 /boot             
├─sdb2       8:18   0   2.7T  0 part
│ └─md2      9:2    0   2.7T  0 raid1                   
│   └─mdcrypt
│          253:0    0   2.7T  0 crypt /                 
└─sdb3       8:19   0     1M  0 part

I'd like to migrate that over to BTRFS to make use of deduplication and snapshots.

But I have no idea how to set it up since BTRFS has its own RAID-1 configuration. Should I rather use the existing MD array? Or should I take the drives out of the array, add encryption and then add the BTRFS RAID inside that?

Or should I do something else entirely?

top 8 comments
sorted by: hot top controversial new old
[–] UnfortunateShort@lemmy.world 6 points 1 month ago* (last edited 1 month ago) (1 children)

If I had to do encrypted btrfs RAID from scratch, I would probably:

  1. Set up LUKS on both discs
  2. Unlock both
  3. Create a btrfs partition on one mapper
  4. Add the other with btfs device add /path/to/mapper /path/to/btrfs/part
  5. Balance with btrfs balance start -mconvert=raid1 -dconvert=raid1 /path/to/btrfs/part
  6. Add LUKS' to crypttab, btrfs partition to fstab and rebuild/configure bootloader as necessary

In that scenario, you would probably want to use a keyfile to unlock the other disc without rentering some password.

Now, that's from the top of my head and seems kinda stupidly complicated to me. iirc btrfs has a stable feature to convert ext4 to btrfs. It shouldn't matter whatever happens outside, so you could take your chances and just try that on your ext volume

(Edit: But to be absolutely clear: I would perform a backup first :D)

[–] bjoern_tantau@swg-empire.de 1 points 1 month ago

Thanks, sounds good. I need the running system, so I'd first set up BTRFS on one disc, test it and then add the other disc.

[–] far_university190@feddit.org 3 points 1 month ago* (last edited 1 month ago) (2 children)

luks encrypt both drive, raid 1 btrfs the lvm?

but you need to decrypt both drive then. i think exist some script to decrypt two drive with same key but cant find.

edit: btrfs raid superior because bitrot detection + healing, most normal raid can detect but not heal.

[–] Ooops@feddit.org 4 points 1 month ago

Decryption isn't a problem if you use the systemd hooks when creating your initrams. They try to decrypt every given luks volume with the first key provided and only ask for additional keys if that fails.

I have 3 disks in a btrfs raid setup, 4 partitions (1 for the raid setup on each, plus a swap partition on the biggest disk), all encrypted with the same password.

No script needed, just add rd.luks.name=<UUID1>=cryptroot1 rd.luks.name=<UUID2>=cryptroot2 rd.luks.name=<UUID3>=cryptroot3 rd.luks.name=<UUID4>=cryptswap to your kernel parameters and unlock all 4 with one password at boot.

[–] bjoern_tantau@swg-empire.de 3 points 1 month ago

I will be decrypting from a small busybox inside the initrd. I suspect that it will decrypt both drives if the passphrase is the same. At least that's how it works on the desktop.

[–] delirious_owl@discuss.online 0 points 1 month ago (1 children)

Personally I'd do zfs and luks

[–] bjoern_tantau@swg-empire.de 3 points 1 month ago (1 children)

Why not ZFS's own encryption?

Though I would rather go with BTRFS since I don't have any experience with ZFS.

[–] someonesmall@lemmy.ml 1 points 1 month ago* (last edited 1 month ago)

ZFS encryption works fine but AFAIK it's complicated to do full disk encryption (for the OS drive) - this is easy to do with with luks. ZFS is not complicated and just works - at least that was my experience. There is also a lot of help available online.