A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
Any issues on the community? Report it using the report flag.
Questions? DM the mods!
File a small slit in the end of the slot so the card fits into it, but runs past the back. The card will run at Gen 3 x1 speed, but otherwise work properly.
Many motherboards even come with the end of the PCIe slots open for this exact purpose.
Edit: Gen 3 x1 runs at almost a full GB/s, so a 2.5Gb/s card (notice the change in size of the "B") should have more than enough bandwidth on Gen 3 x1, even at 2.5Gb/s full duplex.
A word of caution for anyone cutting out the slot: make sure there aren't other obstructions, like capacitors, ICs, and NVMe drives in the way of where the PCIe card will be.
The manufacturers that have the slot pre-cut will have already reserved the space, but even then, it's on you to check that it's suitable for a x16 if they only reserved space for a x8 card.
If you don't want to risk modifying the slot, try one of the cheap PCIe risers on amazon and send it back if it doesn't work. You will need a case with a couple of extra slots under the motherboard in order to fit the riser in there though.
It will run slower, but that probably won't be an issue unless you plan to max out all 4 ports simultaneously.
I did this but buying these on Amazon is scary. Try to find one that won't burn your house down.
I cannot see any decent PCIE X1 to X16 risers on amazon. Everything is USB based which I don't want
They are not USB based, they just happen to use a USB 3 cable to carry the PCIe signals.
Hand saw?
I don't want to cut the card
Cut the slot? Or desolder it and replace it with one with an open back.
The slot is open. I'm just wondering whether the card will work properly in that slot since all the pins won't be attached. PCIe Gen 3 X1 bandwidth is more than enough for it
They all have to work (at least to an extent) using only x1. It's part of the PCIe spec.
Missing pins are actually extremely common. If your board has a slot that's x16 (electrically x8), which is very common for a second video card, take a closer look. Half the pins in the slot aren't connected. It has the full slot to make you feel better about it, and it provides some mounting stability, but it's electrically the same as an x8 that's open.