Lol. Tesla stock down 30% since June.
Tesla, seriously, that roaring sound that’s rising in pitch is y’all about to slam into the ground. Eject the dead weight already.
This is a most excellent place for technology news and articles.
Lol. Tesla stock down 30% since June.
Tesla, seriously, that roaring sound that’s rising in pitch is y’all about to slam into the ground. Eject the dead weight already.
I mean, to be fair no one will be able to beat geely over the next decade.
BYD has been flooding the market lately
yet another feature a regular Car can do better than this truck. its pretty damn sad when your truck fails at basic vehicle properties, before you even get to what its supposed to be, 'truck'. kinnnnda comical how bad this thing is.
such sweet nectar the schadenfreude, i could live off it for days.
I deliver to a Tesla dealership/lemon farm everyday, and they had one on display. It had a smudge on the driver side rear quarter panel that they never got buffed out.
You don't buff these things. You have to regrain them by rubbing an abrasive material across the panels in one direction same as a DeLorean.
Yeah that certainly reinforces a sense of longevity. Just rub off part of the door every time you have to clean it.
It's sad that there's nothing your can put on the metal, like something to paint on top of it or something. Like something clear, or in different colors even. Ah here I go again, being crazy with my imagination.
Imagine spending 80K on a truck that starts rusting in days. Oh the poor Elon Musk's s***ers. It might be a really hard blow to feel that betrayed by their idol.
This cybertruck fiasco is getting more ridiculous by the day.
lol. Cybertrucks are looking like my sink.
They should invest heavily in Barkeepers Friend. Works pretty well on the sink.
Yeah. My understanding is that Deloreans were shockingly rust resistant but were also panels specifically so that they could be replaced.
I don't know metallurgy/material science well enough to know if cybertrucks actually used good quality stainless steel or cut corners. And I can easily see a world where people assume the dirt is rust because of paranoia or just looking for internet drama/clout.
But... Rust or no rust, those cars are pretty fucked. Because they don't even have a clearcoat. And considering we are in the season where roads are covered with salt and sand and cars are constantly bombarded with a highly abrasive slurry at speed, those panels are going to see a LOT of wear and damage.
Tesla uses SS301 stainless. DeLorean used SS304.
301 is cheaper, less resistant to corrosion, can resist more force applied to it before failure, formes better in stamping, doesn't tolerate high-temperatures as well.
My guess is they used 301 due to cost and forming properties. Supposedly they use 301 on the Starships, so bulk pricing would help keep production costs low. Had they used 304 the raw material cost and cost of production at volume would be higher but they would be less likely to have these corrosion issues, assuming they aren't welding the panels.
SS301 is a great material. It's workable, ductile, and still plenty hard. It's absolutely perfect for work holding in an industrial spot welding environment.
Why on earth they'd use that for body panels is fucking beyond me. Ok, it's bullet proof, kinda, which is cool I guess? I've never been shot at in a car, I don't know anyone who's ever been shot at in car.
I know lots of people with cars that they don't like to rust. Or scratch tho. Seems like the bigger problem in car design honestly
SS301 is a great material
Totally agree. But is this an appropriate use for it? I regularly have to use sandpaper to remove surface rust from my SS301 knife. And I don't leave that out in the rain. It's just surface rust, doesn't damage anything, but it is rust and it's very ugly.
Thankfully with a knife, it takes two seconds to remove the rust. With an entire car? And body panels with areas that are hard to get to? Honestly if I was going to buy a cybertruck I would paint it.
If you want "real" stainless, you want 316, but it's not as strong and would require significant modifications - making it thicker/heavier/more expensive/worse battery range/etc.
Paint, they always need paint. A lot of science went into that. https://www.youtube.com/watch?v=b_hgPinCZks
Even "good quality" stainless steel can easily rust, as anyone who's owned quality kitchen knives will tell you. Some stainless alloys are more resistant than others -- but exposed to the right conditions they all corrode.
Tesla is just recognizing that each cybertruck owner has different color preferences, so they deliver the cybertruck without any paint or coating so the owners can coat it themselves /s
It's relatively common for nice metal bikes to go the unfinished metal route...if they're made of titanium.
I saw one in person 2 days ago. I took a picture, and none of my coworkers think it's a real picture (or that I took it).
It was surreal. I could see it coming from WAY down the road and I was thinking to myself "there is absolutely no way I am seeing a cybertruck right now"
I am dumbfounded they actually made them. I still can't believe what I saw the other day
What a pos. Links to pictures here- https://www.cybertruckownersclub.com/forum/threads/cybertruck-spots-corrosion.12242/
Lmaooo
Yeah it’s like “I actually like getting brutally raped at the dealership, excited to get my backside exploded!”
Insane levels of copium.
One of the replies in that thread:
I’m know I’m a weirdo but I actually kinda like the corrosion and hopefully the associated patina that will come with it.
Wow.
The cope is strong with that one.
Holy shit that's not insignificant! Those things are going to be piles of rust in just a few years.
Insane
But really who cares, we are not forced to buy these cheesy blobs of cheap grade stainless. Let the tech bros take one for the team.
Can't wait to see what happens when one gets dinged by road gravel, it's going to be even uglier.
Oh and about that 5-6k coating that will prevent the rust? It'll just prevent you from seeing the rust, don't worry, the rust will get there, it always does, that's one of a dozen reasons why steel has been moved away from for decades.
Tesla has been pretty good at selling vehicles, even really expensive ones. This one has been kind of bizarre though. From the massive and strange body to the issues in production, I'm not sure if we'll start seeing these become more common on the road.
Isn't that the butler's job?
Real stainless steel does not rust. I brew beer and daily soak down my stainless steel sink/kettles daily. Even harsh chemicals (muritiac acid, chlorinated caustic soda) don't affect it.
Theres no such thing as "real stainless". Stainless steel 304 is corrosion resistant, it's the cheapest and most common. 316 is better at corrosion resistance and is "marine grade" since it will hold up better to salt water. 316L is some of the best at resisting corrosion, it's more expensive than 304 and is used in lab and surgical equipment. There are a lot of other types, like 309 for higher heat applications, etc.
Cybertruck is probably made from 304.
Definately not supprised that cybertrucks are having this issue. Especially with road salt in the winter. I'm sure the engineers at Tesla saw this coming too.
There are a lot of grades of stainless, but they all can rust. What you're doing with your kettles is unlikely to cause rust, because you are actively cleaning them daily. Letting a contaminant sit on them and periodically get wet without being cleaned our dried is a worst case scenario, and also what constantly happens to cars.
https://www.unifiedalloys.com/blog/stainless-grades-families
Yeah and Musk used the chinesium (capitalist) grade, cheapest possible garbage
I am not an expert - just an avid knife freak - but in my experience "Stainless" means "Stain Less" not "Stain Resistent". Eg. s35vn
is relatively high quality stainless knife steel - that does not mean it ain't gonna pickup stains - all mine did... I suspect one of the differences between my knifes / Elons Cybertruck vs. your cookware is that your cookware is mirror polished while my knives and the cybertruck are sporting "satin finish" which looks quite esthetically first 5 mnts - but is quite inpractical...