it looks like there is a bedrock branch, but i personally have no experience with bedrock.
see this issue for more details: https://github.com/minekube/gate/issues/11
jake_jake_jake_
joined 1 year ago
i have used gate for my internal and external, works very well and i do exactly what you are asking and separate different versions and modpacks by name https://github.com/minekube/gate
everything should be behind a firewall
make sure it's configured for clean shut downs before your battery runs out, auto power up on restoration, and hope it doesn't happen. you will eventually have an outage that outlasts your batteries.
I have a large string of batteries from an old telco office, that runs my rack for 14hrs (calculated, I shut everything down around this time) and that did not last for the 2-3 day outage we had after a storm. Without a generator, you will inevitably have an outage, but if you are prepared, then you can mitigate any damage. use NUT if you need to shutdown or power multiple devices from one monitored UPS
This is possible, and exact directions will vary on distribution of the vm client. I personally do this but with split horizon dns and dnsmasq on a vm.
impossible to leak is where it gets tricky, and that will require an understanding of networking in your distribution. there will also be tutorials on this, but it's very easy to mess up.
would be a good idea to test the backups on 7, and double check the release notes, they hold just about every caveats. The 7to8 upgrade was not horrible, if you have backups, you could always attempt the upgrade after taking backups, then if successful take new backups, test, then install new drives and restore. depends on how paranoid you feel.
If this was a production system, that is probably the change plan i would follow, but in production I would also be able to migrate VMs. I am not nearly as careful in the home environment.
NY has similar provisions, as section 201-D of the labor law specifically prohibits discrimination based on cannabis usage, with exceptions.
Exceptions generally are for businesses that receive federal funding, CDL drivers in accordance with 49 CFR Part 382, and non-employees (contractors, students, volunteers).
what about that doesn't work? just because you don't know how doesn't mean not possible.
https://developers.cloudflare.com/dns/manage-dns-records/how-to/managing-dynamic-ip-addresses/
https://github.com/ddclient/ddclient#using-ddclient-with-dhcpcd
https://openvpn.net/community-resources/configuring-openvpn-to-run-automatically-on-system-startup/
maybe a vpn provider that uses openvpn? advanced setup but you can have an openvpn client auto connect on boot and bind the mail and ddclient to the tunnel interface.
cloudflare has good support for ddclient, so when your IP changes updates are automatic.
from your router can you ping the AP behind that switch, while the issue is occurring? All L2 unmanaged switches, no tagging? POE from the switch or an injector? If from the switch maybe put an injector in between?
I work for an ISP in the network engineering dept, I personally have never seen an issue exactly like this before, but we generally do power calculations for switching and wifi, this sounds like a power issue to me.
one of the reasons you see these as separate is because of the amount of modularity you get with grafana, you don't always use it with prometheus, sometimes with ELK sometimes Influx and Telegraf. If you intend to set it up outside of the "typical" you start to really appreciate one piece doing one thing, and doing it well.
view more: next ›
ahh yes, the liberal DA, wait a second. republican frank wood DA, that can't be right??? You must mean the sheriff then... but dane kirby is a republican too! But this is obviously a liberal problem, caused by the LeFt WiNg.