xan1242

I have the same issue on one of the controllers.

There are some hall effect sensor kits on Aliexpress but that requires extensive work to set up and install.

Not a bad idea actually, totally didn't think about that.

Maybe even a PCIe pass through to a VM could do the trick if you're desparate lol (with Linux living in a separate drive)

Orrrr maybe even try FreeBSD... (or mac OS, but eww gross don't test that)

The only thing I can think of is to try the drives in a different system and see how they behave (same OS and configuration).

If they behave the same then that rules out everything except the drives themselves and the OS.

Considering how you mentioned the behavior is better in Windows, it sounds like a software issue, but you never know until you try.

FWIW I've also had memory issues with XMP.

Turns out that ASUS firmware is omega pepega and decided to go against AMD's specifications even for XMP profiles.

CLDO VDDP was stuck at the same voltage as SOC. Per AMD it has to be up to VSOC - 0.1V

So, after manually setting that, and other VDDP and VDDG voltages, it magically started working perfectly.

So do check voltages anyway even if you found a bad stick. Mine endured through the crappy firmware thanks to it being Samsung B-die.

Also check this for more info in general (I recommend this even if you won't OC, just the memtest alone is a huge section)

https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md

I tested with OCCT to find even more errors, so either do that in a mini windows environment or do one of the Linux tests to check memory some more. Memtest86+ isn't enough.

Display and processor? If the answer is yes or maybe, then Doom can run on it.

First of all, thank you very much for your service.

Secondly, you're crazy lmao

I am pretty sure TianoCore is also used by AMD systems as a reference as well.

Here's a similar situation that happened in 2019 at Lenovo's site

https://support.lenovo.com/cl/es/solutions/LEN-22660

AMD systems are listed as well.

As for most board vendors nowadays, I think they barely do anything with the code itself and just create the setup utility and boot logos. It is highly likely that they're affected too.

Aren't AMI, Insyde and Phoenix providers for 98% of PC (be it board or OEM) vendors though?

And AFAIR, TianoCore is basically used everywhere by everyone as a base except maybe Apple.

Did you fight a lion on the way to school on one foot while the other foot was starting a business?

Jak and Daxter is still theirs.

Come play Unreal with us then hehehe