this post was submitted on 22 May 2024
219 points (96.6% liked)

Memes

45704 readers
1278 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
 
all 48 comments
sorted by: hot top controversial new old
[–] Funkytom467@lemmy.world 81 points 6 months ago* (last edited 6 months ago) (1 children)

This is a fucking differential equation with unknown constants, so yeah, everyone will be burning...

[–] sharkfucker420@lemmy.ml 6 points 6 months ago* (last edited 6 months ago)

Maybe use c~1~ and c~2~?

[–] transientpunk@sh.itjust.works 43 points 6 months ago (2 children)

The Navier Stokes equations represent the universal laws of physics that can model any fluid in the universe.

These equations have been around since almost two centuries now but we still understand very little about them. When we have a set of equations we expect the following to happen-

  1. Solution should exist- One should be able to solve the equations

  2. Solution should be unique- Given particular initial conditions, one should obtain an unique solution to the problem. For example if you and your friend pour water into a container in an identical way, keeping all parameters (pouring velocity, direction, geometry and dimensions of the container, etc) identical then you both should get the same flow pattern. Water in both the containers should behave in exactly the same way. If your friend gets air bubbles at a point then you should get them at the exact same point as well.

  3. Solution should be smooth- A finite change in the input should produce a finite change in the output. It should not be erratic and unpredictable.

Unfortunately, Navier Stokes equations do not satisfy any of the conditions mentioned above.

https://medium.com/@ases2409/navier-stokes-equations-the-million-dollar-problem-78c01ec05d75

[–] Reddfugee42@lemmy.world 10 points 6 months ago (1 children)

The Navier Stokes equations represent the universal laws of physics that can model any fluid in the universe.

Clearly you've never had a Pan-galactic Gargle Blaster.

[–] SmackemWittadic@lemmy.world 2 points 6 months ago

I got one of those between my legs, which explains why no one has ever heard of it

[–] Zerush@lemmy.ml 7 points 6 months ago* (last edited 6 months ago)

There is still waiting a prize of $1 Millon solving it, fuck the Thermostat

[–] deegeese@sopuli.xyz 35 points 6 months ago (1 children)

One thing I remember from physics is if you have to guess, the most common answer is zero.

[–] sharkfucker420@lemmy.ml 35 points 6 months ago (1 children)

As a physics major this is very true. The answers are always 0, 1, or π

[–] captainlezbian@lemmy.world 9 points 6 months ago (2 children)
[–] chemical_cutthroat@lemmy.world 18 points 6 months ago (1 children)

Only if you are blowing shit up.

[–] PM_ME_VINTAGE_30S@lemmy.sdf.org 4 points 6 months ago* (last edited 6 months ago)

If your signal looks like f(t) = K•u(t)e^at with u(t) = {1 if t≥0, 0 else}:

  • If Real(a) > 0, then your signal will eventually blow up.
  • If Real(a) < 0, then you signal will not blow up. In fact, your signal will have a maximum absolute value of |K|, and it will approach zero as time goes on.
  • If Real(a) = 0, it is either a complex sinusoid or a constant. In either case, it is bounded with maximum absolute value of |K|. It very much does not blow up.

So e pops up all the time in stable systems and bounded signals because the function e^at solves the common differential equation dx/dt = ax(t) with x(0)=1 regardless of the value of a, particularly regardless of whether or not the real part of a causes the solution to blow up.

[–] sharkfucker420@lemmy.ml 5 points 6 months ago* (last edited 6 months ago)

Usually it is e^t or something similar

[–] Thcdenton@lemmy.world 29 points 6 months ago (2 children)

73 is my ideal temp, but fuck lockin the thermostat. It should be set lowest temp desired by anyone. You can always wear a hoodie. But the human torch in your life can only get so naked.

[–] Passerby6497@lemmy.world 7 points 6 months ago (1 children)

That's all well and good until you have someone in your household with circulatory issues and can't warm themselves up effectively. Sucks having to be warm all the time so they're not cold and in pain.

[–] Thcdenton@lemmy.world 5 points 6 months ago

Yup I mentioned that earlier with my pops. He hates the ac. I'll roast a little bit if it helps him tho.

[–] The_Hideous_Orgalorg@sh.itjust.works 7 points 6 months ago (1 children)

Wait until you pay the bill and someone thinks they need to crank the heat instead of putting on a sweater.

[–] Thcdenton@lemmy.world 3 points 6 months ago

My dads like that. He's diabetic and he doesn't like blankets 🙃

[–] Mr_Dr_Oink@lemmy.world 25 points 6 months ago

Used a screen shot to Google this and it turns out to be some unsolved ancient equation regarding the laws of physics. Or something that I dont understand. And have probably misrepresented here.

[–] ColeSloth@discuss.tchncs.de 20 points 6 months ago (1 children)

Easy to solve.

Buy one of those electric hand warmers and wedge it between the two thermostats.

[–] boatsnhos931@lemmy.world 2 points 6 months ago

I like the cut of your jib! 😝

[–] nikaaa@lemmy.world 18 points 6 months ago (3 children)

Wait isn't this just some fluid physics equation?

Like, incompressible fluid flow, iirc.

[–] crapwittyname@lemm.ee 12 points 6 months ago (3 children)

It looks like it given the symbols used. P for pressure, rho for density etc. u-arrow is definitely a vector field, so it could be fluid flow. Otherwise it could be equally anything described by a vector field, like electromagnetism or gravity but they usually have a lot more E and G involved I think. I used to solve these but then I got a certificate so now I don't have to.

[–] supercriticalcheese@lemmy.world 4 points 6 months ago

It's a fluid dynamics equation, cannot be analytically solved unless laminar flow assumption is valid.

[–] InputZero@lemmy.ml 3 points 6 months ago* (last edited 6 months ago)

It really reminds me of all those static and velocity pressure calculations I had to do in undergrad, until I got the degree.

[–] nikaaa@lemmy.world 2 points 6 months ago

u stands for velocity.

[–] maculata@aussie.zone 4 points 6 months ago (1 children)
[–] nikaaa@lemmy.world 1 points 6 months ago (1 children)

Yeah i mean, now you know what to search for on the internet.

[–] maculata@aussie.zone 2 points 6 months ago

Them funny hieroglyphics ain’t nowhere on MY keyboard.

Dunno what kinda crazy com’nist Martian setup y’all are runnin’.

[–] supercriticalcheese@lemmy.world 4 points 6 months ago

Naviers stokes equation looks incompressibility fluid. Only possible to solve it for strictly laminar flow.

https://en.wikipedia.org/wiki/Navier%E2%80%93Stokes_equations#Incompressible_flow

[–] plz1@lemmy.world 15 points 6 months ago (1 children)

Irony is, a lot of larger office building thermostats are really only there for display purposes (thermometer), not for control purposes (actually functional).

[–] rbesfe@lemmy.ca 7 points 6 months ago

Often tenants can change the thermostat to whatever they want visually, but in the background it caps at a certain value or doesn't change the set point at all

[–] Feathercrown@lemmy.world 11 points 6 months ago* (last edited 6 months ago) (2 children)

Am I missing something or does the top equation knock out half the terms? It simplifies to just F = delta + deriv. of u wrt t, right?

(Assuming p =/= 0)

Wait nope some of those ps and us are different. Oh no

[–] mexicancartel@lemmy.dbzer0.com 4 points 6 months ago (1 children)

Also its not delta, its upside down delta called "Del" (or nabla) which is an operator like derivative but in vector feilds

[–] Feathercrown@lemmy.world 6 points 6 months ago

This deal keeps getting worse every day 😭

[–] Wizard_Pope@lemmy.world 3 points 6 months ago

Because some of those are rho and mu

[–] brokenlcd@feddit.it 8 points 6 months ago

Or if you know what you are doing electrically speaking pull the thermostat off the wall and connect the cooling/heating line to common for a bit; I think it would actually be less effort

[–] unmagical@lemmy.ml 5 points 6 months ago

My work set the password to the facilities manager's phone extension which could just be looked up in the internal directory.

[–] zonsopkomst@lemmy.ml 4 points 6 months ago

Easy, I just need a wire, toothpaste, bubblegum, and and a watch crystal. Problem solved!

[–] getoffthedrugsdude@lemmy.ml 4 points 6 months ago

Aren't those locked with actual keys?

[–] vk6flab@lemmy.radio 3 points 6 months ago

Or you could point a flamethrower at the sensor..

For less drastic response, put your hand on the sensor.

[–] ftbd@feddit.de 3 points 6 months ago

No boundary and initial conditions?