Linux

I use awk all the time, nothing too fancy, but when you need to pull out elements of text it's usually way easier than using cut.

awk {' print $3 '} will pull the third element based on your IFS variable (internal field separater, default is whitespace)

awk {' print $NF '} gets you the last element, and awk {' print $(NF-1) '} gets you one element from the last, and so on.

Basic usage but so fast and easy for so many everyday command line things.

awk will always have a soft spot for me, but I can see why not many take the time to learn it. It tends to be needed right there at the border of problem complexity where you are probably better using a full-fledged scripting tool.

But learning awk is great for that "now you're thinking in pipes" ah-hah moment.

All the time. Not always by choice!

A lot of my work involves writing scripts for systems I do not control, using as light a touch as is realistically possible. I know for a fact Python is NOT installed on many of my targets, and it doesn't make sense to push out a whole Python environment of my own for something as trivial as string manipulation.

awk is super powerful, but IMHO not powerful enough to justify its complexity, relative to other languages. If you have the freedom to use Python, then I suggest using that for anything advanced. Python skills will serve you better in a wider variety of use cases.

awk predates perl as well as python by a pretty large margin (1978); it's useful, of course, for processing things in a pipeline, but as it became obsolete as a general-purpose scripting language, users have had less and less of a reason to learn its syntax in detail -- so nowadays it shows up in one-liners where it could be replaced by a tiny bit of cut.

I had worked through a good bit of the O'Reilly 'sed & awk' book -- the first programming book I got, after being enticed by shell scripting in general. Once I learned a bit of Python, & got better at vim scripting, though, I started using it less and less; today I barely remember its syntax.

I use awk constantly at work. Very useful in my opinion, and really powerful if you dig into it.

Yes, for things too complex to do in sed but not complex enough to need a "normal" programming language like python.

I use awk on the daily. It has a wider and more consistent install base than perl.

Nearly every day. There was a time when I'd reach for Ruby, but in the end, the stability, ubiquity, and portability of the traditional Unix tools - among whom awk is counted - turned out to be more useful. I mainly underuse its power, though; it serves as a column aggregator or re-arranger, for the most part.

I used to use the command line, Bash, Awk, Sed, Cut, Grep, and Find (often piped to one another) quite often. I can recall that the few times I used Awk was usually for collating lines from logs or CSV files.

But then I switched to using Emacs as my editor, and it gathers together the functionality of all of those tools into one, nice, neat little bundle of APIs that you can easily program in the Emacs Lisp programming language, either as code or by recording keystrokes as a "macro."

Now I don't use shell pipelines hardly at all anymore. Mostly I run a process, buffer its output, and edit it interactively. I first edit by hand, then record a macro once I know what I want to do, then apply the macro to every line of the buffer. After that, I might save the buffer to a file, or maybe stream it to another process, recapturing its output. This technique is much more interactive, with the ability to undo mistakes, and so it is easier to manipulate data than with Awk and shell pipelines.

I use awk all the time. a very common and probably simplest reason I use it is it's ability to handle variable column locations for data.

if you know you always want the last field you can do something like

awk '{print $NF}'

but usually using it as for performing more advanced operations all in one go without having to pipe something three times.

sure you can do grep cut grep printf, but you can instead do the pattern matching, the field, the formatting, whatever you need to all in one place.

it's also got a bunch of more advanced usage of course since it's its own language. one of my favorite advanced one liners is one that will recognize if it is going to print a duplicate line anywhere in your output and prevent it. in cases where you don't want to sort your output but you also want to remove duplicates it is extremely helpful and quick rather than running post-processing on the output in another way.

all that said main reason I use it is because I know it and it's fast, there's nothing you can do in awk that you can't do in Python or whatever else you're more comfortable with. The best tool for the job is the one that gets it done quickly and accurately. unless your environment is limited and it prevents the installation of tools you're more familiar with then there's no real reason to use this over Python.

Yes! Awk is great, I use it all the time for text processing problems that are beyond the scope of normal filters but aren't worth writing a whole program for. It's pretty versatile, and you can split expressions up and chain them together when they get too complicated. Try piping the output into sh sometime. It can be messy though and my awk programs tend to be write-only

I use it multiple times a day. I only know basic usage, but it's super useful as part of an awk/grep/sort/uniq pipeline, basically just extracting a field to work on.

Anyone interested in awk make sure to check the just published awk book second revision by original authors. Kernigan's writings are a joy to read.

I think it's pretty niche but is a great tool for parsing / converting data into a format that is more easily digested by another program.

Think for example a report from an 80's system that spits out many tab separated values in a different format based on some code. Then these tables are all separated by two blank lines and order of them is randomised. To top that off you need to then pipe it all to a different program that only accepts a specific format.

You could do it in Python by doing a parse, process, stringify code but if you know awk you can do all those steps at the same time with less code.

Sure, in the age of REST the Python approach is better but awk is a very powerful tool for the "I have a specific output but need a specific input" problem.

awk is supposed to be simpler. If it isn't, just use your favorite scripting language. It comes from a period of time when a lot of the scripting languages weren't as easy to use or readily available.

I use awk a good bit. Not as much as when I was doing data work, though. It's better than cut at splitting on whitespace in many contexts. Lots of other nice uses like variable scope, regex, and summing

Grep is fiiiiine.

sed is okay but a little nasty, when your sed script is longer that one search-replace command you gotta ask yourself what you're doing really (yes, sed is a full-featured Turing-complete programming language, if you go far enough into the man page).

When I see awk in any stackoverflow recipe, I just say 'fuck it' and rewrite the whole thing in Python. Python is included into the minimal system image in Debian, the same as awk, but is way less esoteric, and you can do python -e 'import os, sys; commands;' for a one-liner console script.

And if you want to talk about portability, try writing scripts for Android 4.4 ash shell. There's no [ ] command. You do switch/case to compare strings.

Sometimes I copy and paste an awk command from online, but I can never remember how to write it myself

Best use-case of AWK is that you can avoid using grep for picking a Nth word in specific line. I tend to ask GPT4 to write one-liner for me. Works super great.

I learned awk when I was studying and I still use it every now and then. It's one of those tools that come in really handy at times. I work in Ruby, but there's still times when scripting or just wanting to process some text when I end up using awk because it makes sense.

Awk has the advantage over Perl/Python/etc. that it's standardized by POSIX. Therefore you can rely on it on all operating systems. It's pretty much the only advanced scripting language available that is POSIX -- the alternative would be some heavy shell scripting or almost-unreadable sed.

With embedded like OpenWRT on a router where you only have busybox/ash shell, awk is your primary expansions tool.

I think I've used it once in 15 years or so. It's typically easier to go with bash or Python.

I use sed a lot

awk is pretty damn solid. When I was completely rewriting the gravity.sh script from Pi-hole about six years back, it was easily the fastest for parsing and uniquely sorting content from files with a couple million lines. It made things much more usable on Raspberry Pi Zero hardware, since changing to another language like Python was out of the question.

Yes, but for a very specific case. I used to write highly portable scripts that could be executed in different environments (various linux distros, including minimal containers, freebsd and even solaris 10). I couldn't use bash, perl, python and even gawk. Only POSIX shell (I always tested my scripts with dash and ksh93, for solaris 10 compatibility - with its jsh), portable awk (tested with original-awk, gawk and mawk) and portable sed (better forget it if you need to support solaris).

Before that I didn't understand why should I need awk if I know perl. And awk really sucks. Once I had to replace a perl one-liner with an awk script of ~30 lines for portability.

P.S. I never use awk just for print $1 as many do. It's an overkill.

I haven't found a use for awk that couldn't be accomplished with bash builtins or other common commands.

Every day. piping srdout to a combination of awk and sed makes shell operations a lot easier. A lot of my earlier perl hacks have now been replaced by a combination of awk, sed, and xargs

awk often can be found in my scripts.

Everyday. I’ve got a lot of stuff that uses it. Granted most of it was mostly created a decade ago but with minimal maintenance it works great. The most helpful script is parsing megacli outputs so I can get a heads up on drive failures and rebuilds among other things.

No, I don't need it because of jc and nushell

I use it for my very basic static site generator: https://www.olowe.co/2021/01/site-build.html

Just had to use it today to turn a key file into a single string with line breaks:

awk 'NF {sub(/\r/, ""); printf "%s\\n",$0;}' id_rsa

I used awk to migrate users from one system to another. I created template scripts for setting up the user in the new system, I dumped the data from the old system, then used awk to process the dump and create scripts for each user in the new system. That was a fun project.

I used awk in a physics computer simulations course I had at the university. That's a nice tool to know how to use

I don't tend to use awk in scripts as I do tend to do them in Python, but I do use awk on almost daily basis in one-liners.

Probably the most common thing for me is so I can read a config file without annoying comments and big line spaces.

grep -v "^#" krb5.conf | awk NF

cut is actually next to useless, because it cannot understand that multiple spaces can still be a single separator in most text files in /etc. You have to use AWK.

awk is awesome! I love it, and I do not regret learning how to use it.

That said, my workflow invariably always shifts from starting with awk to do something simply with a tiny one-liner, to then doing that with perl or python, and sometimes even creating a file to make the by-now multi-line scripts more easily readable.

I do not recommend starting with awk, if you do not know other languages already such as Python.

In short, let your intuition guide you.