Lifebandit666

I've been using SB for years but it's just a bit shit sometimes.

What I love about it is that it has Chromecast Bridgez meaning I can play music to my Google Home Minis.

But nowadays I have all my music in Plex and I'm using Symphonium to stream to my phone. Symphonium connects up nicely.to my Google minis, I just need something to replace my squeeze lite end points so I can send music to them from my phone.

Currently these are both running on Pis so if anyone can recommend an easy UPNP endpoint software for a pi, that would be great.

I saw an appreciation post for Gluetun on here in the last couple of weeks. I'd set it up before my server died and I had to reinstall everything, but then gone for the easy method when I was reinstalling.

So my easy method install had a VM as a server running Plex and Docker and a second VM with Mullvad installed running anything that needed a VPN in Docker.

Yesterday I opened up a program behind the VPN and it wasn't working again. I had to restart the VM to get it going and it annoyed me. So before work I set up Gluetun.

I had previously used this walkthrough https://youtu.be/9dJPOd0XbN8 so I went back to it, looked in the notes and found his GitHub, then his docker compose under Torrent-VPN.

I stole his initial Gluetun config and the qBittorrent part, but then went into Portainer and took all my running containers and added them to the file. I took the ports out of each compose file and added the "network mode" and "depends on Gluetun" bits from the qBittorrent part of his config and added them to each compose file I added to the file.

Then the ports I had removed I added to the Gluetun part of his compose file.

Downloaded a config file for Mullvad and added the IP and private Key to the Gluetun compose.

Then launch the stack and it worked.

Now for the Gotchas. I had to go into Portainer to get the IP address that the whole stack used. This IP address was required to get containers talking to each other. If you need Sonarr to connect to Prowlarr it needs this IP address.

Also the downloader (he uses qBittorrent and I used RDT client) needed to be mapped using "localhost" for each container and the port

But other than those Gotchas it was quite easy and I managed to get everything set up an hour after finishing work. This was because I just used backups of my already running containers and restored them in the new ones, then edited the bits that had changed (IP addresses in my Gotchas)

The upside is that I'm now only using the one VM, meaning I've saved 4gb of RAM.

I can use that ram for something else now. Nextcloud? Immich?

Hope this helps someone else.

I've got 3 HDDs connected to my Proxmox machine via usb3. They worked fine until this week. I have them mounted and passed through to OMV.

One failed on Sunday. It was fine one minute, I rebooted and Proxmox wouldn't boot...

Couldn't work out why it wouldn't boot and reflashed Proxmox, losing all my machines (I have since learned the importance of backups since I had none).

I've spent 4 days rewriting it all. Rebooted last night and it happened again, but this time I noticed that it was struggling to find one of my drives and edited them out of Fstab and got it booting again.

I've since added 2/3 drives back in by adding "nofail" to my Fstab entries but my main storage drive is now showing as 100gb instead of 1tb and won't pass through to OMV.

I've come to the conclusion that they were mounted by label and "forgot" their label, hence wouldn't boot, they're now mounted by UUID.

So has anyone got any tips on the best way to mount these things without killing my whole setup?

Also if anyone knows why my storage is showing as 100gb in Proxmox and won't pass through to OMV now I would be eternally grateful. Kinda want to get the files off that drive...

I'm about a month in to playing at self hosting.

I'm currently trying to get a great media server solution going on. I'm trying to containerise as much as I can and have everything sharing a NAS for content.

The last few days I've been adding music to my NAS for the Music server, LMS aka Squeezebox.

I've always liked that I can use LMS with my Google Minis and anything that can run it, and I've seen software for esp32 chips...

Anyway just ripping the 13050 tracks off my old iPod was a slog, and because I can't seem to get more than 4mbps transfer rates it's taken a couple days just to smb transfer the music to the NAS.

Now I passed a Tb HDD through to Open Media Vault so I thought I'd just learn to mount a network share to my Ubuntu container running the Squeezebox server using the same method, Fstab.

TWO DAYS I've been trying to mount in fstab and all I'm hitting is kernel errors or syntax errors. 2 days... It's time to give up.

So I've turned off the PC to get in the bath, and just had a quick look at PCP, the all in one LMS os. I once had it running on a pi zero...

It only has a goddamn dedicated UI portion for adding a samba share!

Tomorrow I will spin up a copy and get it working, THEN I just need to do all my current customisations to THAT instance instead... I'm already in Version 2 of my LMS attempts, so this will be Version 3.

But: my ARR/Plex stack is Version 2 too, version 3 is gonna be Version 1 (Docker) but better (with stacks, mount points and another go at Wireguard, but with NAS and Ubuntu instead of Windows.

Sometimes you've just got to go AFK and make a decision to burn it all down and start again.

Update: I've tried to get PCP running in Proxmox with no dice. Instead I've got Squeezelite running on a pi4b. That has freed up a pi3b which is now running PCP.

I'm using Heimdall to easily access my self hosted stuff ATM. I would like for my family to use them too if they're so inclined, but there's no way they will be able to remember the IP addresses, I know I can't!

Is it a DNS I'm looking for? If so, I'm already hosting a couple of instances of Adguard, can I just set it so that Plex is 192.xxx.x.47 and snapdrop is 192.xxx.x.53 and use that to resolve the request so my 13 year old can just type Plex into his browser and find it?

Or do I need something like Caddy or Nginx or something in between?

Thanks for any advice.

I'm a noob to all this, and love this server. I've recently set up Proxmox and Portainer, got Home Assistant transferred onto my new computer and set up an Arr stack on Windows VM.

I kept adding storage to that stack until it was talking half my internal storage so I bought a usb3 cable and hooked up an old 1tb HDD I had lying around.

I decided I wanted NAS storage with the HDD. I had already set up OMV but it was being a bit funny. Whenever I logged in to it I had no options, so I couldn't add the HDD to it.

So I did some looking around and found TrueNAS. Installed it and started fiddling. Jesus it's hard work to just add an SMB share from it!

After literally hours of tinkering I still was no closer so I gave up and went for a bath.

In the bath it occurred to me that maybe I was logging in to OMV wrong. I fired up the browser on my phone in the bath and instead of logging in with my name, I tried "admin" and lo and behold there is all the options I couldn't see before.

5 minutes later I had half a tb in an SMB share, and then it was a simple case of making network shared folders on all my windows machines.

Thought you guys may be amused by the noob error of logging in as Admin.