SNAP is just a proprietary packaging by Canonical. Basically the same as a flatpak, but fully controlled by Canonical, store and all. Integrated graphics will give you as much resolution as most GPUs, albeit they won't be able to render at dedicated GPU speeds. But unless you're actually rendering very heavy videos, integrated, matched together with 1 or more CUDA TPUs, and YOU set the limits.
jjlinux
DDR5 has gone down dramatically compared to launch. You can get 64GB with a very fast bus for under 200 dollars now. At launch 32GB would easily set you back 250+. AMD has made a killing with Ryzen. Never mind the new naming convention that Intel came up with to make it even more complicated to choose the right CPU for your use cases, ridiculous. As for Nvidia GPU drivers, at the end of the day, they just work, regardless their proprietary drivers philosophy (which, again, I agree sucks). But if the OP is going to be doing AI development, machine learning and all that cool stuff, he'd be better served by getting a few CUDA TPUs. You can get those anywhere from 25 dollars to less than 100, and they come in all types (USB, PCI, M.2). https://coral.ai/products/#prototyping-products I have 1 USB Coral running the AI on my Frigate dicker for 16 cameras, and my CPU never reaches more than 12% while the TPU itself barely touches 20% utilization. You put 2 of those bad boys together, and the CPU would probably not even move from idle 🤣
The 4070 TI will give you quite a few years out of it for sure. You could also completely forego the GPU and get a couple of CUDAs for a fraction of the cost. Just use the integrated graphics and you're golden.
Maybe, I've never bought PC parts on eBay, or used for that matter. Too risky from my perspective. And yes, I'm talking about AMD GPUs. They are very good, but still behind Nvidia in every aspect.
They are not terrible, they just don't hold a candle to a Nvidia card of the same tier. And the Op is buying new not old. Not once did I say anything bad about any brand, like the Op, I'm not married to any of them, and only speak out of personal experience. I dont make money from them, they make money out of me.
If I was to build a rig for myself right now, I would go with your choice of Case, and fill it with this (plus a few fans): https://www.amazon.com/Corsair-H100x-Liquid-Cooler-Desktop/dp/B0C14B8BZV/ https://www.amazon.com/AMD-Ryzen-7800X3D-16-Thread-Processor/dp/B0BTZB7F88/ https://www.amazon.com/GIGABYTE-B650-Warranty-EZ-Latch-Motherboard/dp/B0BH7GTY9C/ https://www.amazon.com/G-Skill-Trident-288-Pin-CL32-39-39-102-F5-6400J3239G32GX2-TZ5RK/dp/B0BJ7X9P1W/ https://www.amazon.com/MSI-RTX-4070-Architecture-12G/dp/B0CHVPPBXV/ https://www.amazon.com/ADATA-Heatsink-Internal-Compatible-ALEG-960M-4TCS/dp/B0BM584Q2C/ https://www.amazon.com/Corsair-RM1000e-Modular-Low-Noise-Supply/dp/B0BYQHWJXC/
Anything above that, for 99% of usecases, is overkill.
I for one would not purchase any Intel hardware as long as AMD is around. Not that they're bad or anything, but AMD gives me much Kore "bang for the buck". To future proof your rig, I strongly suggest you go with the latest socket (be it Intel or AMD, doesn't matter) and make sure you get DDR5 RAM. PCI Gen 4, and then have at it.
Getting an 80 Plus Gold power supply is always nice too.
And then there's the cooling. I see you went with a radiator and fan, but I strongly suggest getting some type of liquid cooling. The prices are not that bad anymore (unlike about 10 years ago, which was insane).
As for the board, you'll get all kinds of different suggestions. Some people swear by Asus, I'd rather go with Gigabyte (love the Aorus line), so it'll come down to brand trust at the end of the day.
As for the card, I hear a lot of crap given to Nvidia about being closed source, and I sort of agree that's messed up, but ATI cards (while pretty good) are always a step behind Nvidia. Plus, most distros have them working out of the box.
It can be intimidating after so many years, but its way simpler than it was back then.
Good luck man, you got this, there's nothing to fear but fear itself.
At least they are being honest and keeping their word on the lifetime promise to those who bought those. How many other companies keep their word like that?
I was about to fly off my handle when I heard this, and was about to send them an email to give them a good piece of my kind. But I chose to read first (don't do this very often) and I found that this applies to new customers only. I think this is pretty fair. I've been using Unraid for 5 years now, and have absolutely no regrets. Anyone thinking on getting an unraid license, now is the time.
Welcome to the club.
That and you need to decide how much positive or negative pressure you want in there as well. You could always do some calculations. Treat your case as an open control volume where mass can transfer across the boundaries. Then the sum of air going into and out of the case must equal the rate of change of air in the case. Assuming the volume of air in your case is constant, this term would be zero. So you can look at the rated volume flow rate for each fan (CFM - aka cubic foot per minute) and see if this summation is positive or negative. A positive value would mean "positive pressure" and a negative value "negative pressure". The only problem is if the fans are not running at max RPM and/or the rated CFM value - which is the case if you have your fans plugged into the motherboard( regardless of whether you're using PWM or 3 pin). In this case, you would have to calculate the volume flow rate of each individual fan as a function of the RPM. This may not be a linear function and would probably require taking some data and coming up with a regression for the data. This would be way harder to do.
tldr: add up the CFM going into the case, subtract the CFM leaving the case. If the value is positive you have "positive pressure"