715
The Framework Laptop 13 is about to become one of the world’s first RISC-V laptops
(www.theverge.com)
this post was submitted on 19 Jun 2024
715 points (98.6% liked)
Technology
59653 readers
2807 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Could someone eli5 risc-v and why the fuss?
Edit: thanks for the replies. Searchingnfurther, this 15 min video is quite well made and told me more than I need to know (for now) https://www.youtube.com/watch?v=Ps0JFsyX2fU
Not an eli5 because I'm still not caught up on it but if my memory serves, RISC-V is an open source architecture for processors, basically like amd64 or arm64, actually I'm pretty sure ARM's chips are RISC derivatives.
Edit: correcting my comment, ARM makes RISC chips, not RISC-V
ARM and RISC-V are entirely different in that neither one is based on the other, but what they have in common is that they're both RISC (Reduced Instruction Set Computing) architectures. RISC is what makes ARM CPUs (in your phone, etc) so efficient and hopefully RISC-V will get there too.
x86 by comparison is Complex Instruction Set Computing, which allows for more performance in some cases, but isn't as efficient.
The original debate from the 80s that defined what RISC and CISC mean has already been settled and neither of those categories really apply anymore. Today all high performance CPUs are superscalar, use microcode, reorder instructions, have variable width instructions, vector instructions, etc. These are exactly the bits of complexity RISC was supposed to avoid in order to achieve higher clock speeds and therefore better performance. The microcode used in modern CPUs is very RISC like, and the instruction sets of ARM64/RISC-V and their extensions would have likely been called CISC in the 80s. All that to say the whole RISC vs CISC thing doesn't really apply anymore and neither does it explain any differences between x86 and ARM. There are differences and they do matter, but by an large it's not due to RISC vs CISC.
As for an example: if we compare the M1 and the 7840u (similar CPUs on a similar process node, one arm64 the other AMD64), the 7840u beats the M1 in performance per watt and outright performance. See https://www.cpu-monkey.com/en/compare_cpu-amd_ryzen_7_7840u-vs-apple_m1. Though the M1 has substantially better battery life than any 7840u laptop, which very clearly has nothing to do with performance per watt but rather design elements adjacent to the CPU.
In conclusion the major benefit of ARM and RISC-V really has very little to do with the ISA itself, but their more open nature allows manufacturers to build products that AMD and Intel can't or don't. CISC-V would be just as exciting.
compressed instruction set /= variable-width. x86 instructions are anything from one to a gazillion bytes, while RISC-V is four bytes or optionally (very commonly supported) two bytes. Much easier to handle.
RISC-V is (as far as I'm aware) the first ISA since Cray to use vector instructions. Certainly the only one that actually made a splash. SIMD isn't vector instructions, most crucially with vector insns the ISA doesn't care about vector length on an opcode level. That's like if you wrote MMX code back in the days and if you run the same code now on a modern CPU it's using just as wide registers as SSE3.
But you're right the old definitions are a bit wonky nowadays, I'd say the main differentiating factor nowadays is having a load/store architecture and disciplined instruction widths. Modern out-of-order CPUs with half a gazillion instructions of a single thread in flight at any time of course don't really care about the load/store thing but both things simplify insn decoding to ludicrous degrees, saving die space and heat. For simpler cores it very much does matter, and "simpler core" here can also could mean barely superscalar, but with insane vector width, like one of 1024 GPU cores consisting mostly of APUs, no fancy branch prediction silicon, supporting enough hardware threads to hide latency and keep those APUs saturated. (Yes the RISC-V vector extension has opcodes for gather/scatter in case you're wondering).
Then, last but not least: RISC-V absolutely deserves the name it has because the whole thing started out at Berkeley. RISC I and II were the originals, II is what all the other RISC architectures were inspired by, III was a Smalltalk machine, IV Lisp. Then a long time nothing, then lecturers noticed that teaching modern microarches with old or ad-hoc insn sets is not a good idea, x86 is out of the question because full of hysterical raisins, ARM is actually quite clean but ARM demands a lot, and I mean a lot of money for the right to implement their ISA in custom silicon, so they started rolling their own in 2010. Calling it RISC V was a no-brainer.
Oh for sure, but before the days of super-scalars I don't think the people pushing RISC would have agreed with you. Non-fixed instruction width is prototypically CISC.
If you can simplify the instruction decoding that's always a benefit - moreso the more cores you have.
You'll get no disagreement from me on that. Maybe you misunderstood what I meant by "CISC-V would be just as exciting"? I meant that if there was a popular, well designed, open source CISC architecture that was looking to be the eventual future of computing instead of RISC-V then that would be just as exciting as RISC-V is now.
Thank you so much for this information.
If you still have commenting motivation, what are the top 5 differences between x86 and ARM?
Up until your post I had thought it exactly was the size of the instruction set with x86 having lots of very specific multi-step-in-a-single instruction as well as crufty instruction for backwards compatibility (like MPSADBW).
You can pay ARM to build and sell cores, you can't do that for x86.
I'm more familiar with RISC-V than I am with ARM though it's my understanding they're quite similar.
ARM/RISC-V are load-store architectures, meaning they divide instructions between loading/storing and doing computation. x86 on the other hand is a register-memory architecture, having instructions that do both computation as well as loading/storing.
ARM/RISC-V also have weaker guarantees as to memory ordering allowing for less synchronization between cores, however RISC-V has an extension to enforce the same guarantees as x86 and Apple's M-series CPU have a similar extension for ARM. If you want to emulate x86 applications on ARM/RISC-V these kinds of extensions are essential for performance.
ARM/RISC-V instructions are variable width but only in a limited sense. They have "compressed instructions" - 2 bytes instead of 4 - to increase instruction density in order to compete with x86's true variable width instructions. They're fairly close in instruction density, though compressed instructions are annoying for compilers to handle due to instruction alignment. 4 byte instructions must be aligned to 4 bytes, so if you have 3 instructions A, B and C but only B has a compressed version then you can't actually use it because there must be 4 bytes between instructions A and C.
ARM/RISC-V also makes backwards compatibility entirely optional, Apple's M-series don't implement 32-bit mode for instance, whereas x86-64 still has "real mode" for running 16 bit operating systems.
There's also a number of other differences, like the number of registers, page table formats, operating modes, etc, but those are the more fundamental ones I can think of.
The MPSADBW thing likely comes from the hackaday article on why "x86 needs to die". The kinda funny thing about that is MPSADBW is actually a really important instruction for (apparently) video decoding; ARM even has a similar instruction called SABD.
x86 does have a large number of instructions (even more so if you want to count the variants of each), but ARM does not have a small number of instructions and a lot of that instruction complexity stops at the decoder. There's a whole lot more to a CPU than the decoder.
ARM is load-store and has a relaxed ordering. Whereas x86 has instructions that can read straight from memory, and has Total Store Ordering. ARM also is fixed instruction width, where x86/AMD64 is variable instruction width. Outside of that the difference is mostly licensing.
The CISC vs RISC thing is dead. Also modern ARM ISAs aren't even RISC anymore even if that's what they started out as. People have no idea what's going on with modern technology.
X86 can actually be quite low power (see LPE cores and Intel Atom). The producers of x86 don't specialize in that though, unlike a lot of RISC-V and ARM producers. It's not that it's impossible, just that it isn't typically done that way.
So is Reduced Instruction Set like in the old assembly days where you couldn't do multiplication, as there wasn't a command for it, so you had to do multiple loops of addition?
Right concept, except you're off in scale. A MULT instruction would exist in both RISC and CISC processors.
The big difference is that CISC tries to provide instructions to perform much more sophisticated subroutines. This video is a fun look at some of the most absurd ones, to give you an idea.
ARM prominently has an instruction to deal with Javascript. And RISC-V will have those kinds of instructions, too, they're too useful, saving a massive amount of instructions and cycles and the CPU itself doesn't really need any logic added, the insn decoder just has to be taught a bit pattern and which microops to emit, the APUs already can do it.
What that instruction will never do in a RISC CPU though is read from memory.
On the flipside, some RISC-V macroops are CISC, fusing memory access and arithmetic. That's an architecture detail, though, only affecting code to the degree of "if you want to do this stuff, and want it to run faster on some cores, put those instructions in this exact sequence so the core can spot and fuse them).
Nah, the Complex instructions are ridiculously complex and the Reduced ones can still do a lot of stuff.
RISC-V is modular, so multiplication is optional but probably everything will support it.
ARM = Advanced RISC Machine
However, RISC-V is specific type of RISC and ARM is not a derivative of RISC-V but of RISC.
Originally Acorn RISC Machine before that
To clarify for those that might not understand that explanation, RISC is just a type of instruction set, x86 is CISC, but arm and RISC-V are RISC
Yup. In general:
Modern CISC CPUs often (usually? Always?) have a RISC design behind the CISC interface, it just translates CISC -> RISC for processing. RISC CPUs tend to have more user-accessible cores, so the user/OS handles sending instructions. CISC can be faster for complex operations since you have fewer round-trips to the CPU, whereas RISC can handle more instructions simultaneously due to more cores, so big, diverse workloads may see better throughput. Basically, it's the old argument of bandwidth vs latency.
Except modern ARM chips are actually CISC too. Also microcode isn't strictly RISC either. It's a lot more complex than you are thinking.
There are some RISC characteristics ARM has kept like load-store architecture and fixed width instructions. However it's actually more complex in terms of capabilities and instructions than pretty much all earlier CISC systems, as early CISC systems did not have vector units and instructions for example.
Yeah, they've gotten a bit bloated, but ARM is still a lot simpler than x86. That's why ARM is usually higher core count, because they don't have as many specialized circuits. That's good for some use cases (servers, low power devices, etc), and generally bad for others (single app uses like gaming and productivity), though Apple is trying to bridge that gap.
But yeah, ARM and x86 are a lot more similar today than they were 10 years ago. There's still a distinct difference though, but RISC-V is a lot more RISC than ARM.
Arm's chips are not RISC-V derivatives.
Yup, they're RISC chips (few instructions), but RISC-V is a separate product line.
It's not just a separate product line. It's a different architecture. Not made by the same companies either, so ARM aren't involved at all. It's actually a competitor to ARM64.
Exactly. That's what I meant by "different product line," like how Honda makes both cars and motorcycles, they may share similar underlying concepts (e.g. combustion engines), but they're separate things entirely.
And since RISC-V is open source, the discussion about companies is irrelevant. AMD could make RISC-V chips if it wants, and they do make ARM chips. Same company, three different product lines. Intel also makes ARM chips, so the same is true for them.
Since when did AMD make ARM chips? Also they aren't as different as a motorcycle and a car. It's more like compression ignition vs spark ignition. They are largely used in the same applications (or might be in the future), although some specific use cases work better with one or the other. Much like how cars can use either petrol or diesel, but say a large ship is better to use compression ignition and a motorcycle to use spark ignition.
At least 10 years now, and they're preparing to make ARM PC chips.
I tried to keep it relatively simple. They have different use cases like cars vs motorcycles, and those use cases tend to lead to different focuses. We can compare in multiple ways:
X86 like motorcycle:
ARM like motorcycle:
The engines (microarch) aren't that different, but they target different types of customers. You could throw a big motorcycle engine into a car, and maybe put a small car engine into a motorcycle, but it's not going to work as well. So the form factor (ISA) is the main difference here.
But yeah, diesel vs gasoline is also a descent example, but that kind of begs the question as to where RISC-V fits in (in my example, it would be a diy engine kit, where it can scale from motorcycles to cars to trucks to ships, if you pick the right pieces).
If you were comparing x86 vs RISC-V you might not be far off. But with ARM vs x86 they have basically the same use cases. Namely desktops, laptops, servers, networking equipment, game consoles, set top boxes, and so on. x86 even used to be used in mobile phones or even as a microcontroller. It's not used in those applications as much now obviously, but it's very much possible. Originally ARM was developed for the desktop too, and was designed for high performance. Lookup the Acorn Archimedes. When people say ARM is coming to the desktop they really should be saying ARM is coming back to the desktop, since that's where it started from.
You're also not correct on the clock speed and IPC front. For a long time Apple's ARM implementation had better IPC than x86 chips. The whole point of RISC is that you can get better clock speeds and execute more instructions vs CISC having more complex instructions being executed more slowly. The only really correct part is that x86 chips are more pipelined. This is due to them being CISC essentially and needing more stages to hit the same clockspeed. Apple's ARM makes up for this by having more superscalar units than x86 chips, allowing for greater IPC.
Putting graphics and video compression stuff on x86 chips isn't new either. That's a question of system design, not of x86 vs ARM. In the server market you get ARM chips that are CPU only. Both also come paired with FPGAs. So it's not even fair to say ARM has more accelerators on chip. Also any ARM chip with PCIe (such as the server ones) can take advantage of the same co-processors that x86 can, the only limitations being drivers and software.
Sure, when all you have is a hammer, everything looks like a nail. Since then, CPUs have specialized. ARM targets embedded products and they're pushing into servers, with Apple putting them into laptops, and advertising themselves as "low-power." X86 targets desktops and servers and advertise themselves as workhorses. Those specializations guide engineering.
Sure, and that's why RISC tends to go wide, they don't do as much per instruction, so they need to run lots of instructions.
Complex instructions may take multiple clock cycles to complete, especially if you count various sub-circuits. ARM is getting more and more of those, but X86 is notorious for it, and it gets really complicated to predict execution time since it depends on how the CPU reorders instructions. But generally speaking, ARM pushes for going wide, and X86 pushes for more IPC on fewer cores (pipelining, out of order execution, etc).
So that's the idea I'm trying to get across. Basically what Youtube reviewers call "generational IPC improvements."
It was an example to get away from specifics like putting memory controllers, disk controllers, etc on the CPU instead of the northbridge or whatever. X86 has done a lot of this recently too, but ARM is still more of a SOC than just a CPU.
But yes, the line is getting blurred the more ARM targets X86-dominant markets.
Going wide also means having more superscalar units and therefore getting better IPC. You also don't really understand what pipelining does. Using pipeling increases IPC versus not pipe-lining sure, but adding more stages actually can reduce IPC as with the Pentium 4. This is because it increases the penalty for misprediction and branching. Excessive pipeline stages in a time before modern branch predictors is what made the pentium 4 suck. The reason to add more stages is to increase clockspeed (pentium 4) or to bring in more complicated instructions. The way you talk about this stuff tells me you don't actually understand what's going on or why.
Also x86 has had memory controllers on CPUs for well over a decade now. Likewise PCIe, USB, and various other things have also been moved to the CPU - north-bridges don't even exist anymore. Some even integrate the southbridge too to make an SoC much like a smartphone. None of this is actually relevant to the architecture though, they are entirely down to form factor, engineering decisions, and changes in technology which are relevant to the specific chip or product. If x86 had succeeded more in smartphones and ARM had taken the desktop (as was there original intention) then you would be stood here talking about x86 chips including more functions and ARM chips having separate chipsets. So this isn't a fair thing to use to compare x86 and ARM.
It's also not really true that x86 has fewer cores. A modern Ryzen in even a laptop form factor can have up to 16. That's more than Apple put in their mobile chips. I get why people think this way. It's because phones had 8 cores long before PCs, and because it made sense at the time. When ARM cores were smaller and narrower and had much less per-core performance and IPC increasing their number made sense. Likewise more smaller cores is more energy efficient than fewer bigger cores, and this makes sense for something like a smartphone. However nowadays when big, wide, power hungry ARM cores exist and are used in higher power form factors than a smartphone there isn't really the need to have so many. At the same time x86 have efficient small cores these days that in some cases get better performance per watt than their ARM equivalents, and x86 core count has skyrocketed. Both of these platforms were originally focused on per core performance too, as multi-core consumer devices simply weren't a thing. All of this "ARM has more cores and x86 has more single core performance" malarkey was only true for a certain window of time. It wasn't where this all started and it's not where we are going now. Instead what we are seeing is convergent design where ARM and X86 are being used in the same use cases, using the same design concepts, and maybe eventually one will replace the other. Only time will tell.
While I'm with you in general, the "different product lines" analogy really doesn't work well and it'd probably be best just to abandon it :)