this post was submitted on 08 Apr 2024
766 points (99.2% liked)

Memes

45704 readers
1325 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
 

Never pay another DVD rewind fee again! Compatible with all disc formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CDR, CDRW, Audio CD, VCD. Multi-region, code-free rewinder capable of rewinding all 6 region DVD's including RCE/REA encoded discs

top 50 comments
sorted by: hot top controversial new old
[–] SheritaX@discuss.tchncs.de 1 points 2 days ago

How to Clean Scratched DVDs how to clean dirty dvd discs

Using Toothpaste All you have to do is take a little bit of toothpaste and rub it on the DVD. Smear it in a circle to make sure that no stones are left unturned. With the help of water, clean the toothpaste. Using Furniture Polish Furniture polish can do wonders when it comes to cleaning DVDs. When using polish, all you have to do is rub the disc with the polish to make sure that every area is covered. Using Repair Kits The kits are able to get rid of most surface scratches on CDs and DVDs. A complete set kit often comes with a bottle of disc repair liquid, a bottle of disc cleaning liquid, and a soft cloth. Using Banana All you need is a banana and nothing else. Slice the peeled banana and smash a couple of slices. Smear the mashed banana onto the surface of the DVD in circles. Next, take out the peel and repeat the same process. Using Vaseline Rub a little bit of the Vaseline jelly on the scratched DVDs. Spray some cleaner or water on the disk and use a soft cloth to remove all the jelly. Do this until no Vaseline and water is left. How to Clean DVDs with Heavier Grime and Stains

Materials You'll Need:

Soft microfiber cloth (or a lint-free, soft cotton cloth) Distilled water (to avoid mineral buildup) Isopropyl alcohol (preferably 70% or higher) Mild dish soap (optional for heavy stains) A soft-bristled brush (optional for stubborn grime) Compressed air (optional, for removing dust) Step-by-Step Cleaning Process:

Dust Off the Surface: Before using any cleaning solution, blow off any loose dust and dirt from the surface of the disc. Use compressed air or gently wipe with a dry microfiber cloth in a straight line from the center to the outer edge (never in circular motions). Prepare Cleaning Solution: For mild grime, mix a small amount of mild dish soap with distilled water. For more stubborn stains, you can use a mixture of isopropyl alcohol and distilled water (roughly 70% alcohol to 30% water ratio). Avoid harsh chemicals like window cleaners or products with ammonia, as they can damage the disc. Clean with a Cloth: Dampen a soft microfiber cloth with the cleaning solution (don't soak it, it should be damp, not wet). Wipe the disc gently from the center outwards in a straight line. This reduces the risk of leaving streaks or causing scratches. Be sure to avoid circular motions, as these can damage the data layer over time. Dry the Disc: Use a dry, clean microfiber cloth to gently wipe the disc, again working from the center to the outer edge to dry it completely.

It is a good thing to back up physical DVDs by ripping the data somewhere safe. Ripping DVDs to an external hard drive or your computer can be very handy, thereby providing you with an easy way to get back your files in case your discs are scratched. This allows you to skip the usage of physical discs overall. And the best way to rip DVDs is using DVDFab DVD Ripper. The tool is an ideal choice to rip your DVDs, or to convert your DVD to ISO with DVDFab DVD Copy. It can convert any DVD to different formats to save them digitally. The output format is compatible with different devices as well. Below are some noteworthy features of this tool. Have a look.

[–] Tylerdurdon@lemmy.world 116 points 7 months ago (4 children)

I'm wondering if we're at the stage where the joke is missed because the average age of users never experienced the CD.

It's probably confusing people already who never rented VHS tapes

[–] VaultBoyNewVegas@lemmy.world 30 points 7 months ago (5 children)

I'm of the age where I can remember having a load of rewritable cds and DVDs plus those things that supposedly cleared up scratches now those were a scam too.

[–] otacon239@feddit.de 30 points 7 months ago (1 children)

Usually the home versions were scams, but there were better quality ones out there that would remove just a little bit of the top layer, making a smooth finish again. Although deep scratches obviously couldn’t be repaired in this case.

[–] Viking_Hippie@lemmy.world 10 points 7 months ago (1 children)

We used toothpaste and water to "cure" CD and DVD scratches lol. I swear, it (seemed like it) worked! 😄

[–] Rhynoplaz@lemmy.world 6 points 7 months ago (1 children)

Sometimes it did! I tried it on a disc that was so messed up, I figured out couldn't make it work any less, and wouldn't you know, it worked for the first time in a long time. Other times, not so lucky.

[–] ArmoredThirteen@lemmy.ml 5 points 7 months ago (1 children)

Most toothpaste is slightly abrasive so depending on the scratches it can definitely work as a polish. I'd always steal my dad's special glass polish and it was basically like toothpaste

[–] theneverfox@pawb.social 2 points 7 months ago

I learned how to polish glass fiber... It's not any different from polishing anything else, except the "sandpaper" is smoother than normal paper

Toothpaste is an abrasive... Partner it up with finer and finer abrasives and you could get a cd clearer than new

[–] Track_Shovel@slrpnk.net 6 points 7 months ago

I had one that was a hand crank thing. It actually worked pretty well. Whenever I thought that was it for my Diablo II CD, I would run it though there and Presto: good as new.

My Xbox 1 also had this weird thing where it sounded like it was fucking eating the CD too. If it got too grumpy we would use the crank and boom: back to teabagging people in Halo.

[–] RalphFurley@lemmy.world 1 points 7 months ago

I used toothpaste and it never seems to completely work

load more comments (2 replies)
[–] CarbonIceDragon@pawb.social 13 points 7 months ago (1 children)

Doesn't the fediverse userbase trend towards being made up of millennials? I'm on the older end of gen Z myself and grew up with CDs and DVDs, so I imagine most people here are familiar with the technology.

[–] eatham@aussie.zone 1 points 7 months ago

I'm on the younger end of gen z and still know what the are, never actually use them but we have lots. I feel most of us know what old stuff like CDs are because of the Internet tho.

[–] Zerush@lemmy.ml 3 points 7 months ago (1 children)

Gaming disks still exist, also music CD, even vinilos have a comeback.

[–] perishthethought@lemm.ee 2 points 7 months ago* (last edited 7 months ago) (1 children)

Thanks. I'm calling my LPs vinilos from now on. (No /s)

[–] Zerush@lemmy.ml 1 points 7 months ago

There are also rewinders for SP / LP vinilos, I think.

[–] bigkahuna1986@lemmy.ml 60 points 7 months ago (2 children)

Careful with this meme son, it's an antique.

[–] Zerush@lemmy.ml 27 points 7 months ago

Thanks for the "son", it directly make me feel 10 years jounger, like the first day of my retiree age and still without rheumatism.

[–] can@sh.itjust.works 17 points 7 months ago* (last edited 7 months ago)
[–] Hobbes_Dent@lemmy.world 36 points 7 months ago

Oh shit it has MP3 toggle. Sweet.

[–] SatansMaggotyCumFart@lemmy.world 33 points 7 months ago

Last year I spent $787 on Blockbuster charges for not rewinding my DVD's.

With this I could make money rewinding other people's DVDs for a small fee.

[–] Ginger666@lemmy.world 22 points 7 months ago

I HATE THIS PRODUCT!!!

IT DOES NOT REWIND SACDS!!!

MY PINK FLOYD ANIMALS SACD IS STUCK ON PIGS ON THE WING PART 2 HALLLLP

[–] ChaoticNeutralCzech@feddit.de 20 points 7 months ago (1 children)

It is real if it turns counterclockwise. If not, you have to load the DVDs upside down.

[–] kshade@lemmy.world 9 points 7 months ago* (last edited 7 months ago)

They used to make ones that can do both sides at once, but they were too complicated, expensive and basically immediately outdated when dual layer DVDs came around.

[–] sirico@feddit.uk 19 points 7 months ago (2 children)

Reminded me of the scratch removal services some game stores offered

[–] jonsnothere@beehaw.org 13 points 7 months ago (1 children)

Those were legit, though, you can resurface optical media to allow it to be read again

[–] itsonlygeorge@reddthat.com 7 points 7 months ago (1 children)

Yup. The data was encoded on the back of the plastic disc. So long as the “label” surface wasn’t scratched you can resurface the bottom.

[–] andrew@radiation.party 5 points 7 months ago (1 children)

It was more common for commercial discs and some consumer discs to have the data layer sandwiched between the bottom surface and label layer, especially later in cd/dvd’s heyday, to prevent tiny scratches on the label or sharpie marks from destroying bits in the data layer.

[–] MystikIncarnate@lemmy.ca 1 points 7 months ago

There was still a wear layer below the data layer which could be resurfaced. So the services worked.

Commonly it worked by removing some material from the bottom wear layer to remove the damaged bits, so it didn't work forever. You would eventually run out of material to remove and trying to repair it would result in a catastrophic failure of the media.

Writable disks however, not so good.

[–] StuffYouFear@lemmy.world 6 points 7 months ago

Those are real though, and do work, as long as the scratches are not deep

[–] lauha@lemmy.one 15 points 7 months ago (1 children)

More likely a joke product

[–] nednobbins@lemmy.ml 7 points 7 months ago

I remember this. It was definitely a gag gift.

[–] son_named_bort@lemmy.world 15 points 7 months ago (1 children)

Of course it's a scam. You can easily rewind DVDS in your DVD player. You don't need a separate device.

[–] Zerush@lemmy.ml 12 points 7 months ago

I always used a pen in the hole and turning it backwards by hand, also works.

[–] Slovene@feddit.nl 15 points 7 months ago (1 children)

Do they make a Bluray rewinder too?

[–] Rhynoplaz@lemmy.world 9 points 7 months ago (1 children)

Look at this dummy thinking they have to rewind blurays like they're DVDs! 🤦🏻‍♂️🤣😂

[–] Slovene@feddit.nl 2 points 7 months ago

Sorry, I'm old. I'm almost 39, this technology is new to me.

[–] bfg9k@lemmy.world 12 points 7 months ago

DVD-ReWindable

[–] TheRedSpade@lemmy.world 11 points 7 months ago

One of the grocery stores in my town also had video rental. When they started carrying DVDs, they put the "Be kind, Rewind" stickers on the cases.

[–] Batting1000@lemmy.world 10 points 7 months ago

I don’t know about rewind. As a child of the 90’s, you lay that sticky label on there, let your older sibling press the freshly burned disc onto it, and bam, you have a homemade mix CD before Lars can shut down Napster.

As a Metallica fan, I do repent my Napster days, though.

[–] MystikIncarnate@lemmy.ca 10 points 7 months ago

I suspect a few people bought this legitimately. When the CD/DVD revolution happened, a lot of the quattrogenarians spent their entire home video experience inundated with "be kind, rewind" slogans from rental shops. Being fairly frugal and not wanting to pay the extra to have the shop rewind the video for them, they would be obsessed with rewinding a video before returning it. I imagine that some used this unironically to appease their elders into thinking that it was "rewound" before returning rentals. It's useless, sure, but it would have completed the "rewind" step, preventing the unnecessary (and non-existent) rewind fees for mildly dementia ridden elders during the early DVD era. Just having that extra step would appease their need to do it, and prevent complaints and re-explanations that DVDs don't need it.

Just put it on the thing, make it spin backwards for a minute, then package it up. It's useless to explain that you don't have to do that because they won't remember it, and the next time they play a DVD, they'll just be looking for a way to rewind it again.

[–] Digger9850@programming.dev 9 points 7 months ago

I’m sure they sell many. People to dumb these days LOL

[–] can@sh.itjust.works 9 points 7 months ago (2 children)
[–] PipedLinkBot@feddit.rocks 3 points 7 months ago

Here is an alternative Piped link(s):

This cd shaver is totally legit though

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[–] MystikIncarnate@lemmy.ca 1 points 7 months ago

There is merit to it, mainly in high speed applications. When you got up to 48x and 52x speeds, an imbalance could result in a catastrophic failure of the material and the disk could lose structural integrity... aka it can explode.

For audio... Not so much. Since audio always ran at 1x speed. Any disk imbalances would be trivial to the ability for the player to read the disk.

I remember when I converted a bunch of CDs to mp3, the "ripping" program would give errors if it was trying to read too quickly, it would result in those slips and cirps you could hear on some mp3 files. Those were literally read errors from when the data was extracted from the original media... though, it could also be imperfections in the disk, or scratches. I ran mine at... IIRC 4x to ensure there were few, if any, read errors. Sure, it took between 10 and 20 minutes to extract all the tracks from a CD, but I didn't get any audio issues that were so common in early mp3 files.

I imagine that if I had this and used it on the disks for a minute before ripping them to mp3, I could have run it at 8-16x or more with no loss in quality.

For data applications, there's read checking (CRC) to ensure data integrity. If there's a read error, the drive will just retry, slowing down as required to ensure the data is consistent. This is why your CD/DVD drive spins up and down while reading data during something like a file copy off of a disk. Eliminating the need to re-read the data can significantly increase the speed of a copy operation.

The disk shaver did work, it was just marketed poorly. For 1x CD reads, it was generally useless.

[–] cyberpunk007@lemmy.ca 7 points 7 months ago

I was like I don't see what's wrong with that dvd-rewriter...then I noticed what it actually said.

[–] TTH4P@lemm.ee 5 points 7 months ago (1 children)

Good one :)

I had something shaped kinda like this that would "polish the scratches" out of your games/cds. Didn't really work lol

[–] jonsnothere@beehaw.org 2 points 7 months ago

They work on light scratches, but anything too deep will damage the data layer. However, you can do a lot with cloth and toothpaste

[–] darkpanda@lemmy.ca 3 points 7 months ago

Next you’ll be telling me that the stream rewinder I bought is a scam.